TS100 v.2 | LLC Author

We use Cookies to provide best site experience

Accept All

Car Tester TS 100 v.2

TS 100 v.2 has all the necessary functionality to facilitate the search and analysis of electrical circuits and CAN/LIN digital signals. This makes it an indispensable tool both for professionals who install security systems and for car owners who carry out repairs and re-equipment of their cars.

Advice

Specific traits

A compact, ergonomic, and reliable plastic body of TS 100 v.2 makes it comfortable to hold in both the right and the left hand. The device's screen automatically adjusts to the specialist's hand.
Bright monochrome OLED display. Information is perfectly readable under any lighting conditions or viewing angles. It does not require any additional illumination.
Sound and light indication is produced when the positive potential is applied to the probe or when it is grounded. You can adjust the volume and trigger conditions.
Three multifunctional buttons make it easy to operate the device with one hand.
Removable probe. A quick-detachable probe securely attaches to the tester. You can easily remove the probe without any special tools.
A built-in 350mAh battery provides a long-lasting operation without the need for recharging. The battery charge indicator shows when the device needs to be recharged. You can charge the battery via a standard microUSB port from a power bank or laptop. And no more worrying about batteries failing at the most critical moment!
The device consumes 0mA when idle. When idle, the device goes into the Power Saving mode. In the Power Saving mode, its consumption is zero, so there is no need to worry about recharging it even if you have not used it for a long time.
The Flashlight feature has many settings. Often, a specialist has to work in conditions where it is inconvenient to use a separate flashlight, and good lighting of the workspace is one of the most important factors affecting the quality and speed of work. The two built-in LEDs brightly and evenly illuminate the working area, allowing comfortable work even in the dimmest places of the car. You can turn on the flashlight by tapping on its body twice (with your index finger, for example). The flashlight's operating period is easily adjustable via Author Flasher.
Left Hand mode. Almost every fifth person of our planet is left-handed. We have taken this into account, so the device can automatically change the display orientation, depending on which hand you hold the tester in. You can switch between the modes both automatically and manually.
Memory feature. It helps you remember the mode (for example, VOLTAGE/OSCIL) that was selected before turning off the tester, so that you can immediately return to it the next time you turn on the device. Convenient for those who constantly use the same tester mode in their work.
The Settings menu is used to adjust the volume and conditions for turning on the sound and light signal of the tester and the display.
Sleep mode. If the tester is not moving for one to three minutes (configurable), the device's display turns off and the device goes into the Sleep mode, minimizing power consumption. But if you take the tester in your hand, the device will turn on the display and return to the selected operating mode. The current consumption in the Sleep mode is only 2mA.
Automatic shutdown. Even if you forget to turn off the device, it will automatically turn off as per a pre-set time period — from one to five hours (configurable via Author Flasher).
Factory reset. You can reset the tester's settings to default.
Firmware update and configuration via microUSB. You can update the device's firmware and adjust its features via a microUSB port by using our Author Flasher tool.

Operating modes

VOLTAGE

The mode helps you measure the voltage of electrical circuits in the range from 0.1V to 30V.

Besides, it can measure the voltage of electrical circuits with the load of 1kΩ or 50Ω.

OSCIL

It helps you analyze amplitude and time parameters of electrical signals in real time. For greater convenience, you can adjust the scale of the waveform.

The mode is ideal for analyzing the signal from the camshaft and crankshaft, CAN/LIN buses, and others. Use recording and playback of the signal for a detailed analysis.

DETECT

It provides for automatic detection of digital signals from CAN and LIN buses. When detected, the type and level of the signal "CAN-H", "CAN-L", "LIN" are displayed on the screen.

PULSE

Pulse generator. The device generates to the probe negative polarity pulse signals with the duration of 150ms. You can adjust the period of pulse delivery from 100ms to 500ms via Author Flasher.