Author Flasher 4.6 — IGLA input/output configuration and more
Dear Users and Partners,
We are delighted to announce the release of the new Author Flasher 4.6.
The new version has a lot of changes, improvements, and new features.
1.. The process of IGLA input/output configuration implemented. 2.. The process of saving and loading the settings profile implemented. 3.. Improvements for the new AUTOSTART release implemented. Settings management added for: - Turbo timer - Methods to finish autostart - Engine type. - AUTOSTART duration - Autostart zones control. 4.. Configuration of authorization methods for KEYLESS BLOCK and KEYLESS BLOCK PRO improved. 5.. The setting "Digital indication On/Off" for IGLA with firmware 3.10 and higher added. 6.. The list of settings updated. 7.. Localization offered for: - Spanish - French - Portuguese - Italian.
You can download Author Flasher 4.6 on our service portal.
More about input/output configuration for IGLA
Analog inputs and outputs can be configured for the following devices: - IGLA, IGLA Lite - IGLA PRO - IGLA Alarm, IGLA ECO - IGLA M, IGLA BASE.
For these devices, the feature is supported for IGLA firmware V3.10 and higher. For more details, please read our February news New firmware – IGLA V3.10.0
How it works
The new feature requires firmware V3.10 and higher.
Once you have connected a device to Author Flasher 4.6, a new menu becomes available in the Actions field — Input/output settings. Use it to configure the device's wires.
More about functionality of wires and available features
Depending on a device model, the number of wires and features available for configuration may differ.
1.Functionality of wires
2. Available features
For a wire configured as an input: - Service input - Analog ignition - Alarm input. For a wire configured as an output: - Blocking output (normally closed logic) - Blocking output (normally open logic) - Analog validator - Hazard lights (or another external indication) - Alternative management of hazard lights - Analog shutting of the central lock - Analog opening of the central lock - Alternative management of the central lock (impulse, via a single wire). - Siren output - Authorization status - Feature 1* - Feature 2* - Feature 3* - Feature 4* - Feature 5* - A test signal to check operability of the device and output (signal lasting 1 sec with the interval of 1 sec) - LIN.
*The feature can be used to implement the functionality that depends on a specific car. For description of features for a particular car, please go to the Firmware and Comments tab on the service portal.
3. Selection of signal inversion
The feature determines the following: For device inputs — whether the device will react to the occurrence of a signal at the input or to the loss of the signal. For example: 1. The signal "—" is applied to the input — alarm is triggered. 2. The signal "—" disappears from the input — alarm is triggered. For device outputs — whether the device will send a signal to its output when the feature is triggered or the signal will disappear at the output when the feature is triggered. For example: 1. There is no "—" at the output — a command is given to shut the central lock — the "—" pulse occurs at the output for 0.6 sec. – The central lock is shut. 2. The signal "—" is constantly present at the output — a command is given to shut the central lock — a "—" pulse disappears at the output for 0.6 seconds. – The central lock is shut.
With the Wire Remapping feature, the installer has a powerful tool to reach the maximum efficiency, functionality, and usability of the anti-theft system for any supported car.