AUTHOR Team are working hard to upgrade our products. Today, we are happy to introduce a new AUTOSTART feature. Now, IGLA and Autostart are able to communicate via keyfob. How it works IGLA recognizes a keyfob and sends a signal to Autostart to stop the engine letting the driver enter the car without any additional actions. You don’t need a key to get into the car any longer! How I get this feature activated You can configure this function in two ways: 1)Via AUTOSTART menu: · select #22 in the options menu — switching on the engine shut-off function via keyfob · select #23 in the options menu (set as default) — switching off the engine shut-off function via keyfob 2) Via AUTHOR FLASHER: · Open Author Flasher. · Connect AUTOSTART to your PC via Bluetooth and select it from the list of available devices, and click "Configure". · Select "On" or "Off" in Section "Stop Autostart when keyfob appears". Software for this function: ● Autostart — v1.2.0 ● IGLA — v3.5.1* When operating together with ATLAS or COMPASS. ** All the versions after Author Flasher 3.9.1 Meet Author Flasher 3.9.1 Author Flasher 3.9.1 allows to set up AUTOSTART, IGLA, IGLA PRO, and IGLA ALARM in one click! Updates: 1. For IGLA, "alarm button" implemented. 2. For AUTOSTART from Version 1.2.0, the following settings are available: · "Display when the engine is on" — turn on /off the external display when Autostart works. · "AUTOSTART control via alarm" — turn on /off control of autostart via standard key. · "Autostart control via external input" — turn on/off control of autostart via signal from an external device. · "Comfort" — turn on/off comfort functions. · "MT case is installed" — set the type of transmission. · "Option" — turn on/off an additional function. · "Bluetooth module" — turn on/off a Bluetooth module. · "Stop Autostart when FOB appears" — turn on/off the engine with IGLA when a keyfob appears. · "Start Algorithm" — control setting for cars with MT case and Start-Stop button. Now, to enable or disable any functions, you don’t need to click on the service button. All settings are via Author Flasher — either before installing the device in the car or after. Just connect the system to your PC via Bluetooth, find it in the list of available devices, and click "Configure".